Yamaha 01V96 Owner's Manual - Page 43

Input and Output Patching 43 Input and Output Patching The 01V96 is designed to enable you to patch (assign) signals to Inputs and Outputs. This section explains how to view the signals patched to Inputs and Outputs and change the assignment. Tip: If the data from a connected instrument fails to be input, or if you are unable to monitor the signal at the desired output, check the I/O patching, as explained below: Patching Input Channels 4 By default, the Input Channels are patched as follows: • INPUT connectors 1-16 Input Channels 1-16 • ADAT IN channels 1-8 Input Channels 17-24 • Slot channels 1-8 Input Channels 25-32 • Outputs 1-2 of Internal Effects Processor 1-4 ST IN Channels 1-4 Connections and Setup Follow the steps below to view or change the patching. 1 Press the DISPLAY ACCESS [PATCH] button repeatedly until the following page appears. 1 Inputs and Slot channels that are currently assigned to Input Channels are shown in the parameter boxes (1) beneath the channel numbers. The parameter indicators are explained below No assignment • AD1-AD16 INPUT connectors 1-16 • ADAT1-ADAT8............ADAT IN channels 1-8 • SL-01-SL-16 Slot channels 1-16 • FX1-1-FX1-2 Outputs 1-2 of Internal Effects Processor 1 • FX2-1-FX2-2 Outputs 1-2 of Internal Effects Processor 2 • FX3-1-FX3-2 Outputs 1-2 of Internal Effects Processor 3 • FX4-1-FX4-2 Outputs 1-2 of Internal Effects Processor 4 • 2TD-L/R 2TR IN DIGITAL L/R connectors Follow the steps below to view or change the patching. 2 Use the cursor buttons to move the cursor to a patch parameter (1) for which you want to change the assignment, and rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the patching. 01V96-Owner's Manual