Yamaha 01V96 Owner's Manual - Page 90
Setting the Input Channels from the Control Surface
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
90 Chapter 7-Input Channels Setting the Input Channels from the Control Surface You can use the faders, [SEL] buttons, and various buttons and controls in the SELECTED CHANNEL section on the top panel to directly control most parameters for Input Channels. Setting Input Channel Levels and Panning the Channels ■ Input Channels 1-32 1 Press the LAYER [1-16] or [17-32] button to select a layer. 2 Press the [SEL] button of the channel for which you want to adjust the input level and/or pan settings. 3 Use the faders to set the Input Channel levels. 4 Rotate the SELECTED CHANNEL [PAN] control to adjust the pan settings. When you rotate the [PAN] control, the Pan/Route | Pan page is displayed automatically. ■ ST IN Channels 1-4 1 Use the ST IN [ST IN] button to select the desired ST IN Channels. The indicators next to the [ST IN] button display the ST IN Channels currently selected for control by the ST IN section. 2 Press the [SEL] button for the channel for which you want to adjust the level and/or pan settings. 3 Rotate the level control of the desired channel to set the level. You can always view the current channel level at the top of the display. 4 Rotate the SELECTED CHANNEL [PAN] control to adjust the pan setting. The pan setting can be applied to either ST IN channel L or R. To switch between channels L and R for the pan setting, press the same [SEL] button repeatedly. (The channel currently being controlled is indicated in the upper-left corner of the display.) 01V96-Owner's Manual