Yamaha 01V96 Owner's Manual - Page 237
Press the DISPLAY ACCESS [DIO/SETUP], locate the DIO/Setup | MIDI/Host
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Cascading Consoles 237 8 Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly to display the DIO/Setup | MIDI/Host page, then set the Cascade Link parameter to "MIDI." 9 Repeat Step 8 for the master unit. After Steps 8 and 9, the slave unit will be able to transmit and receive MIDI messages. 10 To match the parameters of both 01V96s, locate the DIO/Setup | MIDI/Host page on the copy source unit. Move the cursor to the TRANSMIT button for the SYNC parameter, then press [ENTER]. Data, such as libraries and Scene memories, on the copy source unit is copied onto the other 01V96 via the MIDI ports. If you select the REQUEST button instead of the TRANSMIT button for the SYNC parameter, you can reverse the copy direction. At this point, Bus 1-8, Aux 1-4, and the Stereo Bus on both 01V96s are integrated, and the data is output via Bus Outs 1-8, Aux Outs 1-4, and the Stereo Out on the master unit. If you solo channels on one of the 01V96s, you can monitor the soloed signals via the Monitor outputs. 19 01V96-Owner's Manual Other Functions