Yamaha 01V96 Owner's Manual - Page 138
Surround LR to Stereo, Out signals to the outputs, ADAT OUT channels, or slot output channels.
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
138 Chapter 12-Surround Pan 6 To change the Surround Channel to Bus Out assignment, move the cursor to the SURR/BUS SETUP button, then press [ENTER]. The DIO/Setup | Surr Bus page appears. 1 3 2 A BUS1-BUS8 These parameters select channels to be assigned to the Bus Outs in 3-1, 5.1, and 6.1 Surround modes. B INIT These buttons reset the channel assignment to the default setting. C Surround LR to Stereo When this check box is on, the left and right front signals of the surround channels are output from the STEREO L & R connectors. 7 To change the assignment, move the cursor to the desired Bus parameter, rotate the Parameter wheel to select a channel, then press [ENTER]. The channels are swapped between the selected Bus and the Bus to which the channel assigned to the selected Bus was assigned previously. Tip: • Pressing the DISPLAY ACCESS [SETUP] button repeatedly also displays the Surr Bus page. • Available Bus Outs vary depending on the Surround mode. For example, in 3-1 Surround mode, Bus Outs 1-4 are available. In 5.1 Surround mode, Bus Outs 1-6 are available, and in 6.1 Surround mode, Bus Outs 1-7 are available. 8 Depending on the selected Surround mode or applications, patch the Bus Out signals to the outputs, ADAT OUT channels, or slot output channels. Connect a playback device or MTR to the output connectors. 01V96-Owner's Manual