Yamaha 01V96 Owner's Manual - Page 80
Delaying Input Channels, ADELAY SCALE BGANG button CChannel
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
80 Chapter 7-Input Channels Delaying Input Channels To set the delay for each channel, press the [ /INSERT/DELAY] button repeatedly until the page listed below that contains the desired channels appears. - DLY 1-16 page This page enables you to set the Delay function for Input Channels 1-16. - DLY 17-32 page This page enables you to set the Delay function for Input Channels 17-32. The parameters on these two pages (and the procedure for setting them) are the same. 1 2 3 A DELAY SCALE The following buttons determine the units of the delay value shown below the msec value. • meter Units are set to meters. • feet Units are set to feet. • sample Units are set to samples. • beat Units are set to beats. • frame Units are set to timecode frames. B GANG button When this button is turned on (highlighted), the delay time for each channel in a channel pair can be set simultaneously. When this option is turned off, the delay time can be set for each channel in a channel pair individually. C Channel section You can set individual delay parameters here. The delay parameters include the following items: • ON/OFF This button switches the corresponding channel delay on or off. • msec This parameter sets the delay time in milliseconds. • meter/feet/sample/ beat/frame The delay time can be set using units of meters, feet, samples, beats, or frames, which you select by using the DELAY SCALE buttons. • MIX This parameter sets the mix balance of dry (Input Channel) and wet (delayed) signals. • FB.GAIN This parameter sets the amount of delay feedback. 01V96-Owner's Manual