Yamaha 01V96 Owner's Manual - Page 198
Assigning Plug-ins to Pro Tools Channels, Press the FADER MODE [AUX 8] button.
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
198 Chapter 17-Remote Control Assigning Plug-ins to Pro Tools Channels You can assign plug-ins to five inserts available for Pro Tools channel strips as follows. 1 Press the [F2] button to select Insert Display mode. 2 Press the FADER MODE [AUX 8] button. The [AUX 8] button indicator flashes. You can now select a channel to which you want to insert plug-ins. 3 Press the [SEL] button of each desired channel. 4 Make sure that the INSERT/PARAM button (1) is selected in the INSERT ASSIGN/EDIT section. If the PARAM button is selected instead, move the cursor to the button, then press [ENTER] to select INSERT. 2 1 5 Move the cursor to the ASSIGN button (2), then press [ENTER] to turn on the button. You can now select plug-ins. If you press another channel's [SEL] button after you turn on the ASSIGN button, the button turns off. If you wish to assign plug-ins to other channels, turn on the ASSIGN button again. 6 Move the cursor to one of the four parameter controls, then rotate the Parameter wheel to select a plug-in. By default, the parameter controls enable you to select plug-ins to be assigned to channel inserts #1-#4. To assign a plug-in to insert #5, press the Tab Scroll button [ ] to change the indication in the INSERT ASSIGN/EDIT section. If you are using the TDM system, you can also assign outboard effects processors. 7 Press [ENTER] to confirm the assignment. Repeat Steps 6 and 7 to assign more plug-ins to other insert positions in the channel strip. 01V96-Owner's Manual