Yamaha 01V96 Owner's Manual - Page 189
Display, Insert Display mode [F2] button
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Pro Tools Remote Layer 189 7 Press the LAYER [REMOTE] button. The Remote Layer is now available for control, enabling you to remotely control Pro Tools. Note: When the Pro Tools Remote layer is selected, the 01V96's top panel faders and other channel buttons are available for remote control. To control the 01V96, you need to select an Input Channel Layer or the Master Layer. Display While the Pro Tools layer is selected, you can use the [F2]-[F4] buttons as well as the left and right [ ]/[ ] Tab Scroll buttons to select display modes. You can select the following display modes using these buttons: ■ Insert Display mode ( [F2] button) Press the [F2] button to select Insert Display mode. In this mode, you can assign and edit plug-ins. 1 2 3 4 5 Remote Control 17 A TARGET This parameter enables you to select the remote control target device. B COUNTER This counter indicates the current position. This counter works in unison with the timecode counter on Pro Tools. The display format of the counter is specified in Pro Tools. The following three check boxes in the COUNTER section indicate the currently-selected format. • TIME CODE Pro Tools timecode format is set to "Time Code." • FEET Pro Tools timecode format is set to "Feet:Frames." • BEATS Pro Tools timecode format is set to "Bars:Beats." 01V96-Owner's Manual