Yamaha 01V96 Owner's Manual - Page 24
Digital I/O
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 Chapter 2-Control Surface & Rear Panel B OMNI OUT connectors 1-4 These balanced TRS phone-type connectors output any Bus signals or channel Direct Out signals. The nominal signal level is +4 dB. C STEREO OUT connectors L/R These balanced XLR-3-32-type connectors output the Stereo Out signals. The nominal signal level is +4 dB. Digital I/O Section 1/4" TRS phone plug Ring (cold) Tip (hot) Female XLR plug Sleeve (ground) 2 (hot) 3 (cold) 1 (ground) 12 3 45 A WORD CLOCK OUT connector This BNC connector outputs a wordclock signal from the 01V96 to a connected external device. B WORD CLOCK IN connector This BNC connector inputs a wordclock signal from a connected external device to the 01V96. C ADAT IN/OUT connectors These optical TOSLINK connectors input and output ADAT digital audio signals. D 2TR OUT DIGITAL COAXIAL This RCA phono connector outputs consumer format (IEC-60958) digital audio. The connector is typically used to connect the digital stereo input (consumer format) of a DAT recorder, MD recorder, or CD recorder. E 2TR IN DIGITAL COAXIAL This RCA phono connector accepts consumer format (IEC-60958) digital audio. The connector is typically used to connect the digital stereo output (consumer format) of a DAT recorder, MD recorder, or CD recorder. 01V96-Owner's Manual