Yamaha 01V96 Owner's Manual - Page 99
Setting the Stereo Out and Bus Out 1–8 from the Display, Attenuating the Stereo Out and Bus Out
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Setting the Stereo Out and Bus Out 1-8 from the Display 99 Setting the Stereo Out and Bus Out 1-8 from the Display To set the Stereo Out and Bus Out 1-8 parameters, you can either move the cursor to the desired parameter on the display and change the value, or operate the desired button or control on the top panel. This section explains how to set the parameters on the display. Tip: Refer to Chapter 10 "Input & Output Patching" on page 121 for more information on how to set inserts. Attenuating the Stereo Out and Bus Out To attenuate the Stereo Out and Bus Out signals, press the DISPLAY ACCESS [EQ] button, then press the [F4] button to display the EQ | Out Att page. On this page, you can attenuate the Bus Out 1-8, Aux Out 1-8, and Stereo Out signals. 8 Bus Outs The parameters on this page (and the procedure for setting them) are the same as for Input Channels (see page 83). Delaying the Stereo Out and Bus Outs To delay the Stereo Out and Bus Out 1-8 signals, press the [ /INSERT/DELAY] button repeatedly until the /INS/DLY | Out Dly page appears. The parameters on this page (and the procedure for setting them) are the same as for Input Channels, except that this page does not include the MIX/FB.GAIN parameters (see page 80). Tip: You can also display the Out Dly page by pressing the [ /INSERT/DELAY] button once, then press the [SEL] button to select the Stereo Out or Bus Out 1-8. 01V96-Owner's Manual