Yamaha 01V96 Owner's Manual - Page 157
Editing Effects, AEFFECT NAME BTYPE Cbutton Dbutton EMIX BALANCE
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Editing Effects 157 Tip: • After inserting effects to channels, adjust the MIX BALANCE parameter for the effects, according to the purpose and effects type. • Move the cursor to an empty IN or OUT parameter box and press the [ENTER] button. The Patch Select window appears, which enables you to quickly select available signal paths. Editing Effects To edit effect programs recalled to the internal Effects processors 1-4, press the DISPLAY ACCESS [EFFECT] button repeatedly until the Edit page for the effects processor you wish to edit appears. Effects processors 1-4 correspond to the following pages: • Effects Processor 1.......FX1 Edit page • Effects Processor 2.......FX2 Edit page • Effects Processor 3.......FX3 Edit page • Effects Processor 4.......FX4 Edit page These Edit pages contain the following effect parameters. 1 2 7 3 4 6 5 A EFFECT NAME This parameter displays the name of the effect program currently used by the effects processor. B TYPE This parameter displays the type of effect program currently used by the effects processor. The I/O configuration of the effect program is displayed below this parameter. C button Move the cursor to this parameter, then press [ENTER] to display the Library page for the selected effects processor. D button Move the cursor to this button, then press [ENTER] to display the Patch | Effect page, which enables you to assign signals to the inputs and outputs of Effects processors 1-4. E MIX BALANCE This parameter knob enables you to set the balance between wet and dry signals. When the parameter is set to 0%, only the dry signal is heard. When set to 100%, only the wet signal is heard. Turn on the BYPASS button to bypass the currently-selected effects processor. Internal Effects 14 01V96-Owner's Manual