Yamaha 01V96 Owner's Manual - Page 5
Operating Notes, Interference, Exclusion of Certain Responsibility, MIDI Bulk Dump. - cards
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Operating Notes v • This unit has ventilation holes along the top, front, rear, and sides to prevent the internal temperature from rising too high. Do not block them. Blocked ventilation holes are a fire hazard. In particular, do not operate the unit while it's on its side, is upside down, or while it's covered with a cloth or dust sheet. • This unit is equipped with a dedicated ground connection to prevent electrical shock. Before connecting the power plug to an AC outlet, be sure to ground the unit. • To relocate the unit, turn the power switch off, remove the power plug from the AC outlet, and remove all connecting cables. Damaged cables may cause fire or electrical shock. • If you know you will not use this unit for a long period of time, such as when going on vacation, remove the power plug from the AC outlet. Leaving it connected is a potential fire hazard. Operating Notes • XLR-type connectors are wired as follows: pin 1-ground, pin 2-hot (+), and pin 3-cold (-). • Insert TRS phone jacks are wired as follows: sleeve-ground, tip-send, and ring-return. • The performance of components with moving contacts, such switches, rotary controls, fad- ers, and connectors, deteriorates over time. The rate of deterioration depends on the operating environment and is unavoidable. Consult your dealer about replacing defective components. • Using a mobile telephone near this unit may induce noise. If noise occurs, use the telephone away from the unit. • If the message "WARNING Low Battery!" appears when you turn on this unit, contact your dealer as soon as possible about replacing the internal data backup battery. The unit will still operate correctly, but data other than the presets will be lost. • Before replacing the batteries, back up your data to a memory card, or another unit by using MIDI Bulk Dump. • The digital circuits of this unit may induce a slight noise into nearby radios and TVs. If noise occurs, relocate the affected equipment. • When you change the wordclock settings on any device in your digital audio system, some devices may output noise, so turn down your power amps beforehand, otherwise your speakers may be damaged. Interference This unit uses high-frequency digital circuits that may cause interference on radio and television equipment located nearby. If interference is a problem, relocate the affected equipment. Using a mobile telephone near the unit may induce noise. In this case use the telephone away from the unit. Exclusion of Certain Responsibility Manufacturer, importer, or dealer shall not be liable for any incidental damages including personal injury or any other damages caused by improper use or operation of this unit. 01V96-Owner's Manual