Yamaha 01V96 Owner's Manual - Page 141

Surround Panning 141 Surround Panning You can set the surround pan parameters for each Input Channel. 1 Make sure that the 01V96 is in any Surround mode except Stereo, then press the [SEL] button of the channel for which you want to set surround pan. 2 Press the DISPLAY ACCESS [PAN/ROUTING] button repeatedly until the Pan/Route | Ch Edit page appears. The Ch Edit page displays the selected Input Channel, and its surround pan setting and available pair partner. The following display page is an example in 6.1 Surround mode. 1 2 3 4 5 6 7 98 The following parameters are available on this page: A Surround pan graph This graph indicates the pan positions in a two-dimensional field, with the listening position in the center. A small diamond ( ) indicates the current surround pan position. You can move the current surround pan position ( ) directly to one of the speaker icons by selecting its icon, then pressing [ENTER]. B Trajectory patterns These buttons represent seven trajectory patterns that determine how the surround pan moves when you operate the Parameter wheel or the [INC]/[DEC] buttons. C FAST Turning on this button increases the speed of sound images panned via the Parameter wheel. D Trajectory pattern parameters These parameters fine-tune the surround pan trajectory pattern. • WIDTH This parameter sets the left-to-right width of the selected tra- jectory pattern. • DEPTH This parameter sets the front-to-rear width of the selected tra- jectory pattern. • OFFSET This parameter offsets the left-to-right direction of the selected trajectory pattern. • OFFSET This parameter offsets the front-to-rear direction of the selected trajectory pattern. Surround Pan 12 01V96-Owner's Manual