Yamaha 01V96 Owner's Manual - Page 62
the musical instruments while monitoring the recorded tracks., Start recording on the digital MTR
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
62 Chapter 5-Tutorial 5 Press the [F1] button to display the Pan/Route | Pan page, then use the PAN parameter controls on the page to pan channel signals. 6 Press the DISPLAY ACCESS [HOME] button, then press the [F1] button to display the Meter | CH1-32 page. 7 Make sure that [ON] button indicators 9 and 10 are steadily lit. 8 While the musicians play the musical instruments, raise faders 9 and 10 to set the appropriate monitoring level. If necessary, play back the recording on the digital MTR and adjust the volume balance between the recorded and recording signals. Recording 1 Start recording on the digital MTR, and cue the musicians to start playing the musical instruments while monitoring the recorded tracks. During recording, display the Meter | CH1-32 page, and confirm that the Input Channel levels are not clipping. 2 When the musicians finish playing, stop the digital MTR. 3 To check the recording, play the digital MTR from the beginning. 4 If you are satisfied with the recording, stop the playback and disarm Tracks 9 and 10 on the recorder. 01V96-Owner's Manual