Yamaha 01V96 Owner's Manual - Page 120
Copying Channel Fader Positions to Aux Sends, To execute the Copy operation
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
120 Chapter 9-Aux Outs Copying Channel Fader Positions to Aux Sends While Aux Sends are in Variable mode, you can copy all Input Channel fader positions on one layer to the corresponding Aux Sends. This is convenient when you wish to send to the musicians monitor signals that have the same balance setting as the Stereo Out signals. 1 Press and hold down the copy source layer (LAYER [1-16] or [17-32]) button. Note: If you release the button in the LAYER section before you proceed to Step 2, you will be unable to complete the Copy operation. 2 Press one of the FADER MODE [AUX 1]-[AUX 8] buttons to select the desired Aux Send copy destination. The confirmation window for the Copy operation appears. 3 To execute the Copy operation, move the cursor to the YES button, then press [ENTER]. To cancel the Copy operation, move the cursor to the NO button, then press [ENTER]. Tip: If the copy destination Input Channel has been paired with a vertical partner in another Layer, the fader position will be copied to the partner's Aux Send. 01V96-Owner's Manual