Yamaha 01V96 Owner's Manual - Page 56
EQ'ing the Input Signals, LOW, L-MID, and HIGH bands individually.
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
56 Chapter 5-Tutorial EQ'ing the Input Signals The 01V96's Input Channels feature 4-band full parametric EQ. This section describes how to apply EQ to the signals before they are recorded to the tracks. 1 Press the LAYER [1-16] button. Input Channel Layer 1-16 is now available for control from the channel strip section. 2 Press the [SEL] button for the Input Channel to which you want to apply EQ. 3 Press the [EQ] button, then the [F1] button to display the EQ | EQ Edit page. The EQ Edit page enables you to adjust the EQ parameters for the currently-selected channel. 4 Make sure that the EQ ON button (in the upper-left corner) is turned ON. The EQ ON/OFF button turns the currently-selected Input Channel's EQ on or off. If the button is off, press the [ENTER] button to turn it on. 5 While a musician plays the musical instrument, adjust the EQ parameters. To do so, move the cursor to the parameters in the lower half of the page, then rotate the Parameter wheel to change the values. You can adjust the following parameters for the LOW, L-MID, H-MID, and HIGH bands individually. 01V96-Owner's Manual