Yamaha 01V96 Owner's Manual - Page 60
Overdubbing to Other Tracks
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
60 Chapter 5-Tutorial Tip: If the digital MTR supports MMC (MIDI Machine Control) commands, you can use the 01V96's Machine Control function to select tracks or locate a position on the recorder from the 01V96 (see page 208). Overdubbing to Other Tracks This section describes how to overdub the musical instruments or microphone connected to the INPUT connectors 1 and 2 to the digital MTR's Tracks 9 and 10, while listening to the performance recorded on Tracks 1-8. Setting the Input Levels 1 Connect the musical instruments to INPUT connectors 1 and 2, and adjust the corresponding [PAD] switches and [GAIN] controls so that the [PEAK] indicators temporarily flash at the highest volumes. 2 Press the LAYER [1-16] button. PAD 20dB -16 -60 GAIN PEAK [PAD] switch [GAIN] control [PEAK] indicator Input Channel Layer 1-16 is now available for control from the channel strip section. 3 Press the DISPLAY ACCESS [HOME] button, then press the [F1] button to display the Meter | CH1-32 page. 4 Make sure that [ON] button indicators for the channels to which the instruments or microphone are connected are lit, then raise the corresponding faders to 0dB. Turn off the [ON] buttons for the channels not in use. 5 While the musicians play the musical instruments, check the input channel levels using the level meters on the display. 01V96-Owner's Manual