Yamaha 01V96 Owner's Manual - Page 154
Using Effects Processors via Aux Sends, AUX1-8, INS CH1-32, INS BUS1-8, INS ST-L/R
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
154 Chapter 14-Internal Effects Using Effects Processors via Aux Sends You can use effects processors via Aux Sends by patching effects processor inputs to Aux Outs, and effects processor outputs to ST IN Channels. 1 Recall an effect program you wish to use. Refer to page 175 for more information on recalling effect programs. 2 Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | Effect page appears. This page enables you to patch all inputs and outputs of Effects processors 1-4. 1 3 2 This page contains the following parameters: A IN These parameter boxes select the signals to be fed to the effects processors. B OUT These parameter boxes select the destination of the signals output from the effects processors. C button This button recalls the FX1 Edit-FX4 Edit pages, which enable you to adjust the effect parameters. 3 To select a signal to be input to the effects processor, move the cursor to the desired In parameter box, select a signal from the following options, then press [ENTER No assignment • AUX1-8 Aux Sends 1-8 • INS CH1-32 Input Channel 1-32 Insert Out • INS BUS1-8 Bus 1-8 Insert Out • INS AUX1-8 Aux Send 1-8 Insert Out • INS ST-L/R Stereo Out Insert Out To use the internal effects processors via Aux Sends, select Aux 1-8 (in most cases). You can patch a different signal to the other input of 2-in/2-out effect programs. 01V96-Owner's Manual