Yamaha 01V96 Owner's Manual - Page 31

Selecting Layers 31 Selecting Layers Input Channels and Output Channels (Bus Outs & Aux Outs) are arranged into layers, as illustrated below. There are four layers altogether. 3 Operating Basics Input Channel Layer 1-16 Input Channel Layer 17-32 Master Layer Remote Layer The currently-selected layer determines the function of the channel strip, [SEL] buttons, [SOLO] buttons, [ON] buttons, and faders. Use the LAYER buttons to select a layer you wish to edit using the channel strip controls. LAYER 1-16 17-32 MASTER REMOTE The following table shows the layers that you can access using the LAYER buttons, and the parameters you can control using the channel strips on each layer. LAYER buttons [1-16] button [17-32] button [REMOTE] button [MASTER] button Layers Input Channel Layer 1-16 Input Channel Layer 17-32 Remote Layer Master Layer Channel Strips 1-8 9-16 Input Channels 1-16 Input Channels 17-32 Operation depends on the selected target (see page 185). Aux Send masters Bus Out masters 1-8 1-8 Tip: • The function of each channel strip fader depends on the currently-selected Fader mode (see page 33). • The STEREO [SEL] button, [ON] button, and [STEREO] fader always control the Stereo Out signal, regardless of the Layer settings. • The ST IN [SEL] buttons, [SOLO] buttons, [ON] buttons, and level control knobs always adjust the ST IN channels selected via the [ST IN] button regardless of the Layer settings. 01V96-Owner's Manual