Yamaha 01V96 Owner's Manual - Page 127

Insert Patching 127 Insert Patching The 01V96's Input Channels and Output Channels (Stereo Out, Bus Out 1-8, Aux Out 1-8) feature independent Insert Ins and Outs. Inputs, outputs, ADAT connector channels, slot channels, and internal effects processor inputs and outputs can be patched to the Output Channel Insert Ins and Outs. In this way, you can send the signals to external effects processors for processing, or insert internal effects. Individual Insert Patching You can patch the 01V96's inputs, outputs, ADAT connector channels, slot channels, and effects processor inputs and outputs to the Insert Ins and Outs. The same procedure applies to both Input Channels and Output Channels. Effects Input Output Output connector Input connector Insert Out Insert In 10 Input & Output Patching Channel 1 Press the [SEL] button of an Input Channel or Output Channel for Insert patching. 2 Press the [ /INSERT/DELAY] button repeatedly until the /INS/DLY | Insert page appears. 1 2 3 This page contains the following parameters: A POSITION This parameter determines the insert position of the Insert patch or compressor. The insert position is indicated by highlighted COMP or INSERT buttons. 01V96-Owner's Manual