Yamaha 01V96 Owner's Manual - Page 117

Aux Outs Viewing Aux Send Settings for Multiple Channels 117 Viewing Aux Send Settings for Multiple Channels You can view and set parameters for all Aux Send 1-8, including setting levels and Pre/Post parameters. This is convenient when you wish to visually check all Aux Send settings or simultaneously adjust the levels of certain channels routed to Aux 1-8. 1 Press one of the FADER MODE [AUX 1]-[AUX 8] buttons repeatedly until the page listed below that contains the desired channels appears. - View1-16 page This page displays the Aux Send levels of Input Channels 1-16. - View17-STI page This page displays the Aux Send levels of Input Channels 17-32 and ST IN Channels 1-4. These pages display the source Input channels and the corresponding Aux Sends in a matrix. The parameters on these two pages (and the procedure for setting them) are the same. 9 1 2 3 A DISPLAY Use the following buttons to display the desired parameters. • LEVEL Select the LEVEL button to display Send level bar graphs for Input Channels routed to Aux 1-8. • PRE/POST Select the PRE/POST button to display signal source points for Input Channels routed to Aux 1-8. B FIX/VARI These buttons indicate the Aux mode (Fixed or Variable) for Aux Out 1-8 and are only for display purposes. C LEVEL This field displays in dB the level of the Aux Send currently-selected by the cursor. 2 Move the cursor to either the DISPLAY LEVEL or PRE/POST button, then press [ENTER] to display the Level or Pre/Post parameters. 01V96-Owner's Manual