Yamaha 01V96 Owner's Manual - Page 185
Remote Control, About Remote Function
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Remote Control 185 17 Remote Control This chapter describes the Remote function, which enables you to control external equipment directly from the 01V96 top panel. About Remote Function The 01V96's Remote function enables you to control external DAW (Digital Audio Workstation) equipment, MIDI devices, recorders, etc. There are two types of Remote functions (Remote and Machine Control): ■ REMOTE (Remote Layer) To use these types of Remote functions, you must connect the 01V96 to a target device via USB or an optional MY8-mLAN card installed in the slot, and operate the faders and [ON] buttons on the top panel to control the external device remotely. You can specify a target device and parameter values on the DIO/Setup | Remote page. This layer is enabled when you turn on the LAYER [REMOTE] button. During Remote operation, the controls on the top panel enable you to control the external device. (You cannot adjust the 01V96's parameters unless you select a different layer.) You can assign functions of a target device to the controls on the top panel of the 01V96 by using Remote layer. The following targets are available for remote control: • ProTools You can remotely control Digidesign Pro Tools. • Nuendo You can remotely control Steinberg Nuendo. • General DAW You can remotely control DAW software that supports the protocol used by Pro Tools. • User Defined You can also assign MIDI messages to the faders or [ON] buttons to remotely control a connected MIDI device, such as a synthesizer. • User Assignable Layer.......You can combine the 01V96 channels to create a custom layer. (See page 229 for more information on this function.) ■ Machine Control By using MIDI Machine Control commands and the DIO/Setup | Machine page, you can control an external recording machine that is connected to the 01V96 MIDI port, USB port, or optional MY8-mLAN card installed in the slot. Tip: To control external devices from the 01V96, you can also use the User Defined buttons. Refer to "19 Other Functions" for more information. 17 Remote Control 01V96-Owner's Manual