Yamaha 01V96 Owner's Manual - Page 207
When SW is assigned, LATCH
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
MIDI Remote Layer 207 changing values in the range of 00 to 7F (0-127 in decimal) are output. Tip: If "SW" is not assigned in the DATA parameter boxes of the ON section, the current MIDI messages are output. Note: Be sure to set one of the DATA parameter boxes of the FADER section to "FAD." If no "FAD" is assigned, fader operation is ignored. 9 Move the cursor to the LATCH/UNLATCH button, then press [ENTER] to select LATCH or UNLATCH depending on how you want the [ON] buttons to function. • LATCH Pressing the [ON] buttons repeatedly transmits alternating On and Off messages. • UNLATCH Pressing and holding down the [ON] buttons transmits On messages, and releasing the [ON] buttons transmits Off messages. Tip: Refer to the diagrams below for information on how the [ON] buttons behave when Latch or Unlatch is selected. ■ When "SW" is assigned: - LATCH MIDI data transmission (SW=7F) MIDI data transmission (SW=00) Off Illuminated Off - UNLATCH MIDI data transmission (SW=7F) MIDI data transmission (SW=00) Off Illuminated Off ■ When "SW" is not assigned: - UNLATCH MIDI data transmission Off Illuminated Off Tip: In most situations, select Unlatch if SW is not assigned. Remote Control 17 01V96-Owner's Manual