Yamaha 01V96 Owner's Manual - Page 320
Function call: link, 8.3.23 Parameter request
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 320 highlights
320 Appendix C: MIDI 2.8.3.20 Parameter request (Function call: attribute) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, a Parameter Change message will be transmitted on the [Rx CH]. Refer to the above table for the Functions and Numbers. STATUS ID No. SUB STATUS GROUP ID MODEL ID ADDRESS EOX 11110000 F0 01000011 43 0011nnnn 3n 00111110 3E 01111111 7F 00010100 14 0000ffff 0f 0mmmmmmm mh 0mmmmmmm ml 11110111 F7 System exclusive message Manufacture's ID number (YAMAHA) n=0-15 (Device number=MIDI Channel) MODEL ID (digital mixer) Universal Function call attribute number High number Low End of exclusive 2.8.3.21 Parameter change (Function call response: attribute) Transmission When an attribute is modified as a result of receiving a parameter change from Studio Manager, the result of execution will be transmitted as the following parameter change. STATUS ID No. SUB STATUS GROUP ID MODEL ID ADDRESS DATA EOX 11110000 F0 01000011 43 0001nnnn 1n 00111110 3E 01111111 7F 01010100 54 0000ffff 0f 0mmmmmmm mh 0mmmmmmm ml 0eeeeeee ee 0eeeeeee ee 0eeeeeee ee 0eeeeeee ee 11110111 F7 System exclusive message Manufacture's ID number (YAMAHA) n=0-15 (Device number=MIDI Channel) MODEL ID (digital mixer) Universal Function call attribute number High number Low result HH result HL result LH result LL End of exclusive 2.8.3.22 Parameter change (Function call: link) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, the patch link data of the specified scene will be modified. Transmission In response to a request, a Parameter Change message will be transmitted on the [Rx CH]. If [Parameter change ECHO] is ON, this message will be retransmitted without change. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 01111111 7F Universal ADDRESS 00010100 14 Function call 0010ffff 2f link 0mmmmmmm mh number High 0mmmmmmm ml number Low DATA 0iiiiiii ih inpatch 0iiiiiii il 0ooooooo oh outpatch 0ooooooo ol EOX 11110111 F7 End of exclusive function SCENE LIB LINK 0x20 number 0-99(0:response only) 2.8.3.23 Parameter request (Function call: link) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, a Parameter Change message will be transmitted on the [Rx CH]. Refer to the above table for the Functions and Numbers. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0011nnnn 3n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 01111111 7F Universal ADDRESS 00010100 14 Function call 0010ffff 2f link 0mmmmmmm mh number High 0mmmmmmm ml number Low EOX 11110111 F7 End of exclusive 2.8.3.24 Parameter change (Function call response: link) Transmission When link data is modified as a result of receiving a parameter change from Studio Manager, the result of execution will be transmitted as the following parameter change. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 01111111 7F Universal ADDRESS 01010100 54 Function call 0010ffff 2f link 0mmmmmmm mh number High 0mmmmmmm ml number Low DATA 0eeeeeee ee result HH 0eeeeeee ee result HL 0eeeeeee ee result LH 0eeeeeee ee result LL EOX 11110111 F7 End of exclusive 2.8.3.25 Parameter change (Function call: pair, copy) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, pairing will be enabled/disabled for the specified channel. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 01111111 7F Universal ADDRESS 00010001 11 Function call Pair 0000ffff 0f function 0sssssss sh Source channel H 0sssssss sl Source channel L DATA 0ddddddd dh Destination channel H 0ddddddd dl Destination channel L EOX 11110111 F7 End of exclusive function PAIR ON with COPY PAIR ON with RESET BOTH PAIR OFF 0x00 *1) 0x01 *1) 0x02 *1) channel *1) 0:CH1 - 31:CH32, 128:BUS1 - 135:BUS8, 256:AUX1 - 263:AUX8, 512:STEREO Effect is 0:Effect 1-3:Effect 4 • In the case of PAIR, you must specify channels for which pairing is possible. • In the case of PAIR ON with COPY, you must specify Source Channel as the copy source, and Destination Channel as the copy destination. 01V96-Owner's Manual