Yamaha 01V96 Owner's Manual - Page 105

Pairing Buses or Aux Sends 105 Pairing Buses or Aux Sends You can pair adjacent odd-even (in this order) buses or Aux Sends for stereo operation. Paired bus and Aux Send linked parameters and non-linked parameters (that are available for independent controls) are listed below: Linked parameters [SEL] buttons Fader Channel on/off Insert on/off Solo on/off Comp settings Comp insert position EQ settings Fader group Mute group Fade time Recall safe Bus to Stereo on/off* Bus to Stereo fader* Non-linked parameters Output Patching Insert Patching Delay on/off Delay time** Bus to Stereo Pan* Attenuators *** ** You can set this parameter for each channel independently if the GANG button is turned off on the /INS/DLDLY | DLY page. *** You can set this parameter for each channel independently on the EQ | ATT page, but the paired channel settings are linked on the EQ | Edit and View pages. 8 Parameters marked with an asterisk * are available only for Bus Outs. Bus Outs 1 Press the DISPLAY ACCESS [PAIR/GROUP] button repeatedly until the Pair/Grup | Output page appears. 1 2 The parameters on this page are described below. A STEREO/MONOx2 These buttons turn Bus or Aux Send pairs on or off. B F.S This button determines whether Aux Sends follow the Input Channel Surround Pan when the 01V96 is in any Surround mode other than "Stereo." When this button is turned on, Aux Sends follow the Input Channel Surround Pan. This is useful for feeding Surround signals to external Surround effects processors. 2 Move the cursor to the MONOx2 button for the desired Bus or Aux Send, then press [ENTER]. The buses or Aux Sends are paired. 3 To cancel a pair, move the cursor to the STEREO button for the desired Bus or Aux Send, then press [ENTER]. 01V96-Owner's Manual