Yamaha 01V96 Owner's Manual - Page 110
Setting Aux Out 1–8 from the Display, Attenuating Aux Outs
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
110 Chapter 9-Aux Outs Setting Aux Out 1-8 from the Display To set Aux Out 1-8 parameters, you can either move the cursor to the desired parameter on the screen and change the value, or operate the desired button or control on the top panel. This section explains how to set the parameters on the screen. Tip: Refer to Chapter 10 "Input & Output Patching" on page 121 for more information on how to set inserts. Attenuating Aux Outs To attenuate Aux Out 1-8 signals, press the [EQ] button, then press the [F4] button to display the EQ | Out Att page. The parameters on this page (and the procedure for setting them) are the same as for Input Channels (see page 83). Delaying Aux Outs To delay Aux Out 1-8 signals, press the DISPLAY ACCESS [ /INSERT/DELAY] button repeatedly until the /INS/DLY | Out Dly page appears. The parameters on this page (and the procedure for setting them) are the same as for Input Channels, except that this page does not include the MIX/FB.GAIN parameters (see page 80). Tip: You can also display the Out Dly page if you select the desired Aux Out (1-8) by pressing the corresponding [SEL] button while the DLY-related parameters are indicated on the page. 01V96-Owner's Manual