Yamaha 01V96 Owner's Manual - Page 51
Routing Signals, To cancel a pair, press and hold the [SEL] button for one of the paired chan, nels
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Initial Track Recording 51 Parameters are copied. SEL SEL SEL SEL SEL SEL Tip: • You can still select one of the paired channels for control by pressing the corresponding [SEL] button. When you select the channel, the [SEL] button indicator lights up, and the [SEL] button for the paired partner flashes. • You can also determine how to copy the parameter settings to the paired partner by using 5 a special window (see page 226). Tutorial • You can create or cancel pairs on the Pair/Grup pages (see page 93). • You can also group the faders, [ON] buttons, EQs, or compressors of multiple channels (see page 147). 2 To cancel a pair, press and hold the [SEL] button for one of the paired channels, and press the [SEL] button for the other channel. Note: If you want to operate the faders of paired channels, make sure you operate only one fader for the pair. If you try to operate the faders for both channels in the pair, an excessive load will be applied to the fader motor, causing malfunction. Routing Signals To record the 01V96 input signals to an external digital multitrack recorder, you must specify the destination of the signals for each Input Channel. This process is called "routing." There are two routing methods. • Using Bus Outs 1-8 Input Channel signals are first routed to Buses 1-8, then through Bus Outs 1-8 to the output connectors or channels. Use this method to mix multiple Input Channel signals and record them to the MTR's tracks. If you desire, you can process the signals using the Bus Out 1-8 compressors and EQs. In the following example, Input Channel signals are routed through Bus Outs 1 and 2 to ADAT OUT connectors 1 and 2. ADAT OUT connector INPUT connector 1 Input Channels 1 Bus Out 1 CH 1 INPUT connector 2 Input Channels 2 Bus Out 2 CH 2 INPUT connector 3 Input Channels 3 Bus Out 3 INPUT connector 4 Input Channels 4 Bus Out 4 INPUT connector 5 Input Patch Input Channels 5 Bus Out 5 01V96-Owner's Manual