Yamaha 01V96 Owner's Manual - Page 93
Pairing Input Channels Using the Display, AHORIZONTAL BVERTICAL
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Pairing Input Channels 93 2 Move the cursor to the desired button in the Channel Pairing window, then press [ENTER]. The following buttons are available in this window: • CANCEL Cancels the operation. • CH x ➔ y Copies the odd channel parameter values to the even channel. • CH y ➔ x Copies the even channel parameter values to the odd channel. • RESET BOTH Resets both channel parameters to the default settings (same as when Channel memory #01 is recalled). Move the cursor to the desired button, then press [ENTER] to confirm the pair. Tip: Pressing and holding down the first [SEL] button of the paired channels and pressing 7 the second [SEL] button cancels the pair. Input Channels ■ Pairing Input Channels Using the Display 1 Press the [PAIR/GROUP] button repeatedly until the Pair/Grup | Input page appears. 1 2 The parameters on this page are described below: A PAIR MODE Determines how channels are paired. B STEREO/MONO x2 buttons These buttons turn pairs on or off. 2 Move the cursor to the PAIR MODE parameter field (1), then select the HORIZONTAL or VERTICAL button. The function of each mode is described below: • HORIZONTAL This button pairs adjacent odd-even channels (default). • VERTICAL This button pairs counterpart channels on Layer 1 and Layer 2 that share the same physical fader (e.g., CH1 & CH17, CH16 & CH32, etc.). This mode is useful when you wish to use one fader to control both stereo channels. 01V96-Owner's Manual