Yamaha 01V96 Owner's Manual - Page 125
Patching Direct Outs, Patching the 2TR Digital Outputs
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Patching Direct Outs 125 Patching the 2TR Digital Outputs Follow the steps below to change the signal path patched to the 2TR OUT DIGITAL 1 & 2 connectors. 1 Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | 2TR Out page appears. Signals assigned on the Out Patch page can also be assigned on this page. 2 Move the cursor to a patch parameter you wish to change, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the patching. 3 Press [ENTER] to confirm the change. 10 Input & Output Patching Patching Direct Outs Input Channel 1-32 signals can be directly patched to any outputs or slot outputs, as well as Bus Out 1-8 and Stereo Out. This patching is convenient when you wish to record each Input Channel signal to an individual track on a connected recorder. 1 Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | Direct Out page appears. 1 2 The parameters on this page are described below. A 1-32 These boxes indicate the Direct Out destination (outputs, ADAT OUT output channels, and slot output channels) for Input Channels 1-32. B DIRECT OUT Determines the Direct Out signal source position from the following three options: 01V96-Owner's Manual