Yamaha 01V96 Owner's Manual - Page 229
Creating a Custom Layer by Combining Channels (User Assignable Layer), DIO/Setup| Remote appears.
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Creating a Custom Layer by Combining Channels (User Assignable Layer) 229 • EQ Copies the EQ parameter values. C Display Brightness This parameter sets the brightness of the LED indicators in the range of 1 through 4. Creating a Custom Layer by Combining Channels (User Assignable Layer) If you set the Remote Layer target to "USER ASSIGNABLE," you can create a custom layer by combining any 01V96 channels (excluding the Stereo Out). This custom layer is called "User Assignable layer." 1 Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly until the DIO/Setup| Remote page appears. 2 Set the TARGET parameter to USER ASSIGNABLE, then press [ENTER]. A confirmation window appears. 3 Move the cursor to the YES button, then press [ENTER]. The 01V96 displays the page shown below. 1 4 Select the channels you wish to assign to the User Assignable layer using the 1-16 parameter boxes (1). You can store up to four 16-channel setups in four banks by switching Banks 1-4 via the BANK 1-4 buttons. Tip: You can reset the assignment to default by moving the cursor to the CLEAR button and pressing [ENTER]. 5 Use the LAYER [REMOTE] button to assign or recall the User Assignable layer. You can use the faders and [ON] buttons to control the assigned channels. 19 01V96-Owner's Manual Other Functions