Yamaha 01V96 Owner's Manual - Page 161

Scene Memories 161 15 Scene Memories This chapter describes Scene memories, which store 01V96 mix and effects settings. About Scene Memories Scene memories enable you to store a snapshot of 01V96 channel mix settings and internal effects processor settings as a "Scene" in a special memory area. There are 99 Scene memories, and you can recall any Scene using the display pages or the controls on the top panel. Tip: • You can recall Scenes by transmitting Program Changes from external MIDI devices (see page 215). • You can back up Scene memories to external MIDI devices by using MIDI Bulk Dump (see page 222). What is Stored in a Scene? The following parameter settings are stored in a Scene: Scene Mix parameters Effects parameters Remote Layer Scene settings Input Patching Output Patching Parameters All channel faders (and level controls) Channel to Aux Out 1-8 Send levels Aux Out 1-8 & Bus Out 1-8 levels All channel [ON] button settings All channel Phase settings All channel Attenuator settings All channel Delay settings (excluding ST IN Channels) All channel Compressor settings (excluding ST IN Channels) Input channel Gate settings (excluding ST IN Channels) All channel EQ settings All channel Pan settings All channel routings Fader groups, Mute groups, EQ links, and Compressor links All channel pair settings Effect programs recalled for Effects processors 1-4 and their parameter settings Fader and [ON] button status (only when Remote Control Target is set to USER DEFINED) Scene titles and Fade Time settings Currently-selected Input Patch library number Currently-selected Output Patch library number Note: • Scenes take a snapshot of Input and Output Patch library numbers that are in use at the time the Scene is stored, but exclude current (edited) Input and Output patching. • If you do not store the edited Input and Output patching to the libraries, recalling a Scene may change the current patching. Scene Memories 15 01V96-Owner's Manual