Yamaha 01V96 Owner's Manual - Page 81
Gating Input Channels, AKEYIN SOURCE BSTEREO LINK CCURVE DTYPE
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Setting the Input Channels from the Display 81 Tip: • This function is unavailable for the ST IN Channels. • The delay time range depends on the sampling rate at which the 01V96 is operating. (For example, at 44.1 kHz, the range is 0 through 984.1 msec.) • If you select the DELAY SCALE meter or feet button, the distance value can be converted to the delay time based on sonic speeds (about 340 m/sec at 15 degrees Celsius). This option is useful if you wish to correct the timing difference between two sound sources that are far apart. • If you select the DELAY SCALE beat button, a parameter box for setting a note that represents the beat and a parameter box for a tempo (BPM) setting appear below the DELAY SCALE parameter. Setting the note and BPM settings in these parameter boxes enables you to set a delay time that synchronizes to the song tempo. Gating Input Channels To set the Input Channel gates, use the [SEL] buttons to select the desired Input Channel, then press the DISPLAY ACCESS [DYNAMICS] button, then press the [F1] button. The Dynamics | Gate Edit page appears. 7 2 3 Input Channels 4 1 5 6 7 A KEYIN SOURCE Select one of the following buttons to determine the trigger source for the currently-selected Input Channel's gate. • SELF The selected channel's own input signal is the trigger source. • CHANNEL Another Channel's input signal is the trigger source. Select the desired channel in the parameter box below the CHANNEL button. • AUX An Aux Send signal is the trigger source. Select the desired bus in the parameter box below the AUX button. B STEREO LINK This parameter's ON/OFF button enables you to pair gates for stereo operation even when the Input Channels are not paired. C CURVE This area displays the current gate curve. D TYPE This area displays the current gate type (GATE or DUCKING). Note: You cannot change the gate type on this page. To change the gate type, recall a program that uses the desired gate type from the Gate library. 01V96-Owner's Manual