AMD AMD-K6-2/400 User Guide - Page 117
A[31:3] (Address Bus), Pin Attribute, Summary, Driven, Sampled, and, Floated
View all AMD AMD-K6-2/400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
23542A/0-September 2000 Preliminary Information AMD-K6™-2E+ Embedded Processor Data Sheet 5.3 A[31:3] (Address Bus) Pin Attribute Summary A[31:5] Bidirectional, A[4:3] Output A[31:3] contain the physical address for the current bus cycle. The processor drives addresses on A[31:3] during memory and I/O cycles, and cycle definition information during special bus cycles. The processor samples addresses on A[31:5] during inquire cycles. Driven, Sampled, and Floated As Outputs: A[31:3] are driven valid off the same clock edge as ADS # and remain in the same state until the clock edge on which NA# or the last expected BRDY# of the cycle is sampled asserted. A[31:3] are driven during memory cycles, I/O cycles, special bus cycles, and interrupt acknowledge cycles. The processor continues to drive the address bus while the bus is idle. As Inputs: The processor samples A[31:5] during inquire cycles on the clock edge on which EADS# is sampled asserted. Even though A4 and A3 are not used during the inquire cycle, they must be driven to a valid state and must meet the same timings as A[31:5]. A[31:3] are floated off the clock edge that AHOLD or BOFF# is sampled asserted and off the clock edge that the processor asserts HLDA in recognition of HOLD. The processor resumes driving A[31:3] off the clock edge on which the processor samples AHOLD or BOFF # negated and off the clock edge on which the processor negates HLDA. Chapter 5 Signal Descriptions 95