HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 114

4 AUTH-1022 If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO AUTH-1022 Message , [AUTH-1022], ,, ERROR, , Failed to extract from payload: port . Probable Cause Indicates that the authentication process failed to extract a particular value from the receiving payload. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1023 Message , [AUTH-1023], ,, ERROR, , Failed to during : port . Probable Cause Indicates an authentication operation failed for a certain authentication phase. Operation type varies depending on authentication type: • Some operations for switch link authentication protocol (SLAP): certificate retrieve, certificate verification, signature verification, or nonce signing. • Some operations for fibre channel authentication protocol (FCAP): certificate retrieve, certificate verification, signature verification, or nonce singing. • Some operations for Diffie Hellman - challenge handshake authentication Protocol (DH-CHAP). response calculation, challenge generation, or secret retrieve. The authentication phase specifies which phase of a particular authentication protocol failed. A nonce is a single-use, usually random value used in authentication protocols to prevent replay attacks. Recommended Action The error might indicate that an invalid entity tried to connect to the switch. Check the connection port for possible unauthorized access attack. It might indicate that the public key infrastructure (PKI) object for SLAP or FCAP or secret value for DH-CHAP on the local entity is not set up properly. Reinstall all PKI objects or reset the secret value for DH-CHAP properly. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. 44 Fabric OS Message Reference 53-1001338-01