HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 530

75 PDM-1022 Probable Cause Indicates a system call failed. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1022 Message , [PDM-1022], ,, WARNING, , The switch is configured only with IPv6. Probable Cause Indicates that the parity data manager (PDM) cannot synchronize with its peer because the firmware does not support IPv6. Recommended Configure the local switch with IPv4 addresses. Action Severity WARNING PDM-1023 Message , [PDM-1023], ,, WARNING, , Radius is configured for IPv6. Probable Cause Indicates that the parity data manager (PDM) cannot synchronize with its peer because the Radius server is configured for IPv6 addresses. IPv6 is not supported by older firmware. Recommended Configure the Radius server with IPv4 addresses. Action Severity WARNING PDM-1024 Message , [PDM-1024], ,, WARNING, , DNS is configured for IPv6. Probable Cause Indicates that the parity data manager (PDM) cannot synchronize with its peer because the domain name service (DNS) is configured for IPv6. IPv6 is not supported by older firmware. Recommended Configure DNS with IPv4 addresses. Action Severity WARNING 460 Fabric OS Message Reference 53-1001338-01