HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 352

42 FW-1044 FW-1044 Message , [FW-1044], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has changed from a value outside of the acceptable range to a value within the acceptable range. The transmit performance area measures the amount of outgoing laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1045 Message , [FW-1045], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed. If the supplied voltage of the SFP transceiver is outside of the normal range, this might indicate a hardware failure. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Frequent messages indicate that you must replace the SFP. Severity INFO FW-1046 Message , [FW-1046], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has fallen below the low boundary. Recommended Verify that your optical components are clean and function properly. Replace deteriorating cables or Action SFPs. Check for damage from heat or age. Severity WARNING FW-1047 Message , [FW-1047], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . 282 Fabric OS Message Reference 53-1001338-01