HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 619

90 SEC-1318 SEC-1318 Message , [SEC-1318], ,, INFO, , Transaction rejected due to inconsistent fabric Probable Cause Indicates that some domains detected an inconsistent fabric. Recommended Resolve the policy conflict, if there is one, then wait for the fabric to stabilize. Retry the distribution. Action Severity INFO SEC-1319 Message , [SEC-1319], ,, INFO, , updated dbs(s) Probable Cause Indicates the specified event has occurred. Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not Action planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-1320 Message , [SEC-1320], ,, WARNING, , Non-acl domain tries to join a fabric with strict fabric wide policy Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with a strict fabric-wide policy. Recommended No action is required. The domain is denied by disallowing all its E_ports from connecting to the Action fabric. Severity WARNING SEC-1321 Message , [SEC-1321], ,, ERROR, , Failed secure mode enable command. Reason: . Probable Cause Indicates the security enable failed on the fabric because the switch has a conflicting configuration such as fabric wide consistency configuration or AD configuration. Recommended Action Verify the security event was planned. If the security event was planned, run the fddcfg --fabwideset "" command or ad --clear command to clear the fabric wide consistency configuration or AD configuration and retry the secModeEnable command. Fabric OS Message Reference 549 53-1001338-01