HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 244

26 FABR-1016 FABR-1016 Message , [FABR-1016], ,, WARNING, , ficonMode is enabled. Probable Cause Indicates that FICON mode is enabled on the switch through a user interface command. Recommended No action is required. Action Severity WARNING FABR-1017 Message , [FABR-1017], ,, WARNING, , ficonMode is disabled. Probable Cause Indicates that FICON mode is disabled on the switch through a user interface command. Recommended No action is required. Action Severity WARNING FABR-1018 Message , [FABR-1018], ,, WARNING, , PSS principal failed (: ). Probable Cause Indicates that a failure occurred when trying to set the principal switch using the fabricPrincipal command. The message notifies you that the switch failed to become the principal switch because of one of the following reasons: • The switch joined an existing fabric and bypassed the F0 state. • The fabric already contains a principal switch that has a lower world wide name (WWN). Recommended Action Make sure that no other switch is configured as the principal switch. Force a fabric rebuild by using the switchDisable and switchEnable commands. Refer to the Fabric OS Command Reference for more information about the fabricPrincipal command. Severity WARNING FABR-1019 Message , [FABR-1019], , FFDC, CRITICAL, , Critical fabric size () exceeds supported configuration (). 174 Fabric OS Message Reference 53-1001338-01