HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 291

34 FCR-1066 FCR-1066 Message , [FCR-1066], ,, ERROR, , Fabric on port has the same fabric ID as another fabric. Probable Cause Indicates that either the fabric split, or there is another fabric (possibly the backbone) that has the same fabric ID as the fabric connected to the specified port. Recommended Action If the fabric split, then merge the fabrics and manually re-enable the port. If there is another fabric with the same ID, change the fabric ID for the port using the portCfgExport or portCfgVExport commands. Severity ERROR FCR-1067 Message , [FCR-1067], ,, WARNING, , Zone configurations, total LSAN zones and aliases, exceeded on port by entries; max entries: . Probable Cause Indicates that the total number of zone configurations created in the connected fabric exceeds the maximum number supported by the Fibre Channel. The limit includes both active and configured information that is part of the zoning database in the edge fabric. Non-LSAN zones are not counted in the limit. Recommended Limit the logical storage area network (LSAN) zoning related zone configuration in the edge fabric Action connected to this port. Severity WARNING FCR-1068 Message , [FCR-1068], ,, INFO, , The FC Routing service is disabled. Probable Cause Indicates that the FC Routing service is disabled. This is caused by fosConfig --disable fcr, configDefault, or a configDownload with the fcrState set to 2 (disabled). Note that the FC Routing service is disabled by the factory. Recommended No action is required. Action Severity INFO FCR-1069 Message , [FCR-1069], ,, INFO, , The FC Routing service is enabled. Fabric OS Message Reference 221 53-1001338-01