HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 79

Reading a RAS System Message 1 TABLE 3 Example System Message Field Description (Continued) Variable Name Description [EM-1031] 4 (blank) ERROR Message Module and Message Number The message module and number. These values uniquely identify each message in the Fabric OS and reference the cause and actions recommended in this manual. Note that not all message numbers are used; there can be gaps in the numeric message sequence. Sequence Number The error message position in the log. When a new message is added to the log, this number is incremented by 1. When this message reaches the last position in the error log and becomes the oldest message in the log, it is deleted when a new message is added. The message sequence number starts at 1 after a firmwareDownload and will increase up to a value of 2,147,483,647 (0x7ffffff). The sequence number will continue to increase beyond the storage limit of 1024 messages. The sequence number can be reset to 1 using the errClear command. The sequence number is persistent across power cycles and switch reboots. Audit and/or FFDC/SLOT/CHASS IS/FID Flags For most messages, this field contains a space character (null value) indicating that the message is neither an AUDIT or FFDC message. Messages may contain the following values: AUDIT indicates that this message is for a security issue. FFDC indicates that additional first failure data capture information has also been generated for this event. FID is the Fabric ID that can range from 0 to 128. FID 128 means the message was generated by the default switch instance. CHASSIS is the message that was generated by the chassis instance. SLOT number indicates the message was generated from slot # blade main CPU. SLOT #/1 indicates the message was generated from slot # blade Co-CPU. AUDIT:FFDC indicates that the message is for a security issue and additional FFDC information has been generated. Severity Level The severity of the error: 1 = Critical 2 = Error 3 = Warning 4 = Info switchname Slot 7 ejector not closed Switch name or chassis name, depending on the action; for example, high-availability (HA) messages typically show the chassis name, and login failures show the logical switch name. The defined switch name or the chassis name of the switch. This value is truncated if it exceeds 16 characters in length. Run either the chassisName command to name the chassis or the switchName command to rename the logical switch. Error Description A text string explaining the error encountered and providing parameters supplied by the software at runtime. Fabric OS Message Reference 9 53-1001338-01