HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 413

42 FW-1400 Recommended No action is required. Action Severity INFO FW-1400 Message , [FW-1400], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has changed. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1401 Message , [FW-1401], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has fallen below the low boundary. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1402 Message , [FW-1402], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has risen above the high boundary. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended You might have to remove some unwanted files to create some flash space. Run the supportSave Action command to remove files from the kernel space. Severity WARNING Fabric OS Message Reference 343 53-1001338-01