HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 375

42 FW-1196 FW-1196 Message , [FW-1196], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of link resets that the port experiences has changed. Link resets occur due to link timeout errors that indicate no frame activity at all. Recommended Check both ends of your cable connection. Verify if the cable and small form-factor pluggables Action (SFPs) are faulty. Severity INFO FW-1197 Message , [FW-1197], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of link resets that the port experiences has fallen below the low boundary. Link resets occur due to link timeout errors that indicate no frame activity at all. Recommended Respond to this message as is appropriate to the particular policy of the end-user installation. A low Action number of link resets means that the switch is functioning normally. Severity INFO FW-1198 Message , [FW-1198], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of link resets that the port experiences has risen above the high boundary. Link resets occur due to link timeout errors that indicate no frame activity at all. Both physical and hardware problems can cause link resets to increase. Recommended Check both ends of your cable connection. Verify if the cable and small form-factor pluggables Action (SFPs) are faulty. Severity WARNING FW-1199 Message , [FW-1199], ,, INFO, , , , is between high and low boundaries (High=, Low=). Current value is . Fabric OS Message Reference 305 53-1001338-01