HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 136

7 BL-1020 BL-1020 Message , [BL-1020], ,, CRITICAL, , Switch timed out initializing the chips. Probable Cause Indicates that the switch has failed to initialize the application-specific integrated circuit (ASIC) chips. Recommended Action Restart or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. To run this command root access is required. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more information on these commands. If the message persists, replace the switch. Severity CRITICAL BL-1021 Message , [BL-1021], ,, INFO, , Retry , internal port retry initialization, . Probable Cause Indicates that the switch had internal ports not online and that the system is retrying to bring the ports that failed back online. Recommended No action is required. Action Severity INFO BL-1022 Message , [BL-1022], ,, CRITICAL, , Init Failed: Switch DISABLED because internal ports were not ONLINE, . Probable Cause Indicates that the switch initiation failed because one or more of the internal ports was not online. The switch is faulted. Recommended Action Restart or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. To run this command root access is required. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more information on these commands. Additional fault messages precede and follow this error, providing more information. See other error messages for recommended action. If the message persists, replace the switch. 66 Fabric OS Message Reference 53-1001338-01