HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 365

42 FW-1164 Probable Cause Indicates that the number of link failures that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Link loss errors occur when a link experiences a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1164 Message , [FW-1164], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of synchronization losses that the port experiences has changed. Loss of synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create synchronization losses. Recommended Action Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. If you continue to experience synchronization loss errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity INFO FW-1165 Message , [FW-1165], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of synchronization losses that the port experiences has fallen below the low boundary. Loss of synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create synchronization losses. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of synchronization losses means that the switch is functioning normally. Severity INFO FW-1166 Message , [FW-1166], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Fabric OS Message Reference 295 53-1001338-01