HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 367

42 FW-1170 Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of signal loss errors means that the switch is functioning normally. Severity INFO FW-1170 Message , [FW-1170], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of signal losses that the port experiences has risen above the high boundary. Loss of signal generally indicates a physical problem. Recommended Check both ends of your cable connection. Verify that the cable is not faulty. Action Severity WARNING FW-1171 Message , [FW-1171], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of signal losses that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Loss of signal generally indicates a physical problem. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Frequent loss of signal generally indicates a physical problem. Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. Severity INFO FW-1172 Message , [FW-1172], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of protocol errors that the port experiences has changed. Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware problems. Recommended Check both ends of your cable connection. Verify that the cable and small form-factor pluggables Action (SFPs) are not faulty. Fabric OS Message Reference 297 53-1001338-01