HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 84

1 System Module Descriptions Table 5 provides a summary of the system modules for which messages are documented in this reference guide; the system modules are listed alphabetically by name. TABLE 5 System Module Descriptions System Module Description AG Access Gateway allows multiple hosts (or HBAs) to access the fabric using fewer physical ports. Access Gateway mode transforms the Brocade switches as well as embedded switches into a device management tool that is compatible with different types of fabrics, including Brocade-, Cisco-, and McDATA-based fabrics. AN Error or warning messages from the Bottleneck Detection module, including notification of detected bottlenecks ANV AUTH BKSW BL BLL BLS BM ANV error messages indicate problems with the driver that deal with the ENET ASICs on the Fabric OS. They could be either software or hardware-related errors. Authentication error messages indicate problems with the authentication module of the Fabric OS. Messages generated by the Blade Fabric OS kernel software watch dog module. Blade error messages are a result of faulty hardware, transient out-of-memory conditions, application specific integrated circuit (ASIC) errors, or inconsistencies in the software state between a blade and the EM (environment monitor) module. Bloom is the name of the application specific integrated circuit (ASIC) used as the building block for third-generation hardware platforms. Fibre Channel over IP port configuration message over Spike and Striker Blade. Blade management error messages are a result of autoleveling firmware upgrades performed by the control processor (CP). C2 Condor2 error messages indicate problems with the Condor2 ASIC driver module of the Fabric OS. CDR Condor application specific integrated circuit (ASIC) driver error messages. CEE CONFIG CEEConfig error messages indicate problems with the Converged Enhanced Ethernet Configuration module of the Fabric OS. CER This is the core edge routing module on the Brocade director platforms. CHASSIS CNM CONF CTAP CVLC Error messages reporting the problems in the management of the blades in the different slots of the chassis. CNM (Cluster Node Manager ) is a software daemon module of the Fabric OS. The messages from CNM are either problems encountered by CNM, warnings or information to inform the user of events. Status messages for configUpload and configDownload operations. A user-space daemon that forwards non-performance-critical messages from the TAPE driver to the CVLC and Security Processor (SP), and vice versa. This module also maintains a cache of recently acquired keys, reducing requests to the key vault itself. CVLC (Crypto Virtual LUN Controller) is a software module running on BFOS. The messages of CVLC are either problems encountered by CVLC, warnings to alert user, or informative to user. CVLM CVLM (Crypto Virtual LUN Manager) is a software module of the Fabric OS. The messages of CVLM are either problems encountered by CVLM, warnings to alert the user, or informative to the user. DAUTH DAUTH error messages indicate problems with the 802.1x authentication module of the Fabric OS. 14 Fabric OS Message Reference 53-1001338-01