HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 767

AUDIT SULB System Messages Chapter 125 SULB-1001 Message AUDIT, , [SULB-1001], WARNING, FIRMWARE, , , , Firmwaredownload command has started. Probable Cause Indicates the firmwareDownload command has been started. This process should take approximately 17 minutes. The process is set to time out after 30 minutes. Recommended Action No action is required. Allow the firmwareDownload command to continue without disruption. Do not fail over or power down the system during firmware upgrade. Run the firmwareDownloadStatus command for more information. Severity WARNING SULB-1002 Message AUDIT, , [SULB-1002], INFO, FIRMWARE, , , , Firmwaredownload command has completed successfully. Probable Cause Indicates the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is required. The firmwareDownload command has completed as expected. Run the firmwareDownloadStatus command for more information. Run the firmwareShow command to verify the firmware versions. Severity INFO SULB-1003 Message AUDIT, , [SULB-1003], INFO, FIRMWARE, , , , Firmwarecommit has started. Probable Cause Indicates that the firmwareCommit command has started. Recommended No action is required. Run the firmwareDownloadStatus command for more information. Action Severity INFO Fabric OS Message Reference 697 53-1001338-01