HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 280

34 FCR-1021 3. Use Zoning commands on the edge fabrics, to reduce the LSAN zone entries on the edge fabrics. 4. Run portEnable on each EX_Port, one at a time, and verify that this error is not reported again. Severity WARNING FCR-1021 Message , [FCR-1021], ,, WARNING, , Local LSAN device entries exhausted. Probable Cause Indicates that the number of devices created through logical storage area network (LSAN) zones within the MetaSAN exceeds the local LSAN zone database limitations. Recommended Remove excess device entries within LSAN zones so that the number of devices is within the range Action of the local zone database limitations. Severity WARNING FCR-1022 Message , [FCR-1022], ,, ERROR, , Local proxy device slot entries exhausted. Probable Cause Indicates that the resources used to persistently store the proxy device slot to the remote world wide name (WWN) have been consumed. Recommended Remove the proxy device slots by using the fcrProxyConfig command or limit proxy devices by Action removing logical storage area network (LSAN) zone entries. Severity ERROR FCR-1023 Message , [FCR-1023], ,, WARNING, , Local phantom port WWN entries exhausted. Probable Cause Indicates that the number of port world wide names (WWNs) in use exceeds the local port WWN resources. Recommended Action Limit the number of port WWNs required by limiting the remote edge fabric connectivity (which limits the number of translate domains). You can also limit the number of proxy devices for a translate domain (which limits the number of translate domain ports required) by limiting the devices specified in logical storage area network (LSAN) zones. Severity WARNING 210 Fabric OS Message Reference 53-1001338-01