HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 363

42 FW-1139 Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has fallen below the low boundary. SFP state changes occur when the SFP is inserted or removed. A low number of SFP state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1139 Message , [FW-1139], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has risen above the high boundary. SFP state changes occur when the SFP is inserted or removed. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1140 Message , [FW-1140], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has changed from a value outside of the acceptable range to a value within the acceptable range. SFP state changes occur when the SFP is inserted or removed. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1160 Message Probable Cause , [FW-1160], ,, INFO, , , , value has changed(High=, Low=). Current value is . Indicates that the number of link failures that the port experiences has changed. Link loss errors occur when a link experiences a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Fabric OS Message Reference 293 53-1001338-01