HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 712

11 ZONE-1008 Recommended Action There are two ways to avoid this problem. • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch. Severity INFO ZONE-1008 Message , [ZONE-1008], ,, WARNING, , WARNING port Out of CAM entries. Probable Cause Indicates the total number of entries of S_ID CAM is above the limit while creating or adding a zone group. The maximum number of content-addressable memory (CAM) entries allowed depends on the application-specific integrated circuit (ASIC). Recommended If hardware zoning enforcement is preferred, edit the zoning database to have zoned PIDs for that Action port. Severity WARNING ZONE-1013 Message , [ZONE-1013], ,, WARNING, , Quick Loop not supported. Probable Cause Indicates the QuickLoop feature is not supported in the current code release. If the QuickLoop zoning configuration is enabled on the switch, it will not be supported. Recommended Edit the zone database to remove the QuickLoop zoning definition in the effective configuration. Action Severity WARNING ZONE-1015 Message , [ZONE-1015], ,, WARNING, , Not owner of the current transaction . Probable Cause Indicates that a zoning change operation is not allowed because the zoning transaction is opened by another task. Indicates concurrent modification of the zone database by multiple administers. Recommended Wait until the previous transaction is completed. Verify that only one administrator is working with Action the zone database at a time. Severity WARNING 642 Fabric OS Message Reference 53-1001338-01