HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 515

Chapter NS System Messages 72 NS-1001 Message , [NS-1001], ,, WARNING, , The response for request 0x from remote switch 0x is larger than the max frame size the remote switch can support! Probable Cause Indicates the response payload exceeds the maximum frame size the remote switch can handle. Recommended Action Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, or v3.2 or higher, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly. You can also reduce the number of devices connected to the local switch. Severity WARNING NS-1002 Message , [NS-1002], ,, WARNING, , Remote switch 0x has firmware revision lower than 2.2: which is not supported! Probable Cause Indicates the local switch cannot interact with the remote switch because of incompatible or obsolete firmware. Recommended Run the firmwareDownload command to upgrade the remote switch to the latest level of firmware. Action Severity WARNING NS-1003 Message , [NS-1003], ,, INFO, , Number of local devices , exceeds the standby can support , can't send update. Probable Cause Indicates the name server on the standby CP has lower supported capability than the active CP because of different firmware versions running on the active and standby CPs. This means that the active and standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will be disruptive. Recommended To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload so Action that the active and standby CPs have the same firmware version. Fabric OS Message Reference 445 53-1001338-01